Uploaded by common.user153501

Job Evaluation Exercise: Classification Method in HR Compensation

advertisement
Gaining Experience Using the Classification Method:
A Job Evaluation Exercise
Vicki Fairbanks Taylor
Shippensburg University
ABSTRACT
This exercise enables students to practice the classification method of job evaluation. Students
are assigned to a “classification committee” and are given five position descriptions to classify
using The American Society of Civil Engineers’ Job Grading Standards. After individually
classifying the positions, members of the classification committee work together to arrive at a
consensus on the classification of each position. Following classification, the committee
establishes a salary range for the job structure using internet-based resources. This exercise is
appropriate for graduate and undergraduate students studying human resource management and
compensation management. A brief review of job evaluation and the classification method of job
evaluation is provided along with a discussion of exercise, teaching notes and exercise handouts.
Key Words: compensation, job evaluation, classification method, human resources
management, experiential exercise
INTRODUCTION TO JOB EVALUATION
Job evaluation is the process of systematically determining the value or relative worth of
jobs in an organization. Because the results of the job evaluation process are used in the
establishment of pay rates, job evaluation has the potential to significantly influence employee
performance and fairness perceptions (Milkovich, Newman, & Gerhart, 2011). There are various
job evaluation methods; however, ranking, the point method, and job classification are the most
commonly employed (Milkovich, et. al., 2011).
The ranking method orders positions from highest to lowest according to the relative
difficulty or importance of each job. The point factor method calculates job worth by assigning a
point value to jobs based on the degree to which certain compensable factors are present in the
position (e.g., skill, responsibility, effort, and working conditions). Job classification is
considered a non-quantitative job evaluation method where jobs are compared to standardized
position descriptions and assigned to a specific grade or level within the classification
(WorldatWork, 2007). The standardized position descriptions used in the job classification
process can be developed internally by the organization or external standards can be adopted.
For example, professional organizations, such as the American Society of Civil Engineers,
Journal of Human Resources Education
32
Vol. 8, No. 2/3, Spring/Summer 2014
publish job classification standards which are used by organizations when classifying civil
engineering jobs. Another example of a job classification system is the one used by the U.S.
federal government. The General Schedule classification system contains 15 levels (GS–1 to
GS–15) covering professional, technical, administrative, clerical, and other occupations.
The basic steps in the job classification method include the following: (1) conduct a job
analysis and write a position description; (2) compare the job’s content to a generic position
description; and (3) assign the job to the appropriate classification level or grade. The result of
the job evaluation process is a job structure which shows the hierarchy of jobs within an
organization. Market data is then secured for a limited number of jobs in the hierarchy and is
used to develop the final pay structure.
In an attempt to help students gain experience in the classification method of job
evaluation, a job classification exercise was developed. Students were provided job grading
guidelines (generic position descriptions) published by the American Society of Civil Engineers
(ASCE) which outline the knowledge, skills, and responsibilities associated with engineers in
seven different grades, from engineer-in-training to an executive-level position. Students were
also given positions descriptions for five different engineering positions downloaded from an
internet-based engineering job board and asked to classify the positions using the ASCE
Guidelines for Engineering Grades. After classifying the positions individually, students worked
together as a classification committee to reach a consensus on the classifications of each position
description and to create a job structure. The classification committee then used internet-based
resources (O*Net Online and Glassdoor.com) to establish a pay structure with pay rates for each
of the engineering jobs. At the conclusion of the exercise, students presented their results in
class and were shown how the same jobs had been classified by subject matter experts (SMEs)
from a local civil engineering firm. Students then participated in an instructor-led discussion
concerning the job evaluation process, the classification method of job evaluation, and the
process of establishing a pay structure that balances internal alignment with eternal
competitiveness.
An overview of the exercise, as well as instructions for conducting and debriefing the exercise,
follow.
OVERVIEW OF THE EXERCISE
This exercise was developed for use in a face-to-face undergraduate compensation class.
Other potential uses for the exercise include undergraduate and graduate courses in human
resource management or a graduate course in compensation. This exercise could also be adopted
in an online course with group work and discussions taking place through the discussion board
feature of a course management system such as Blackboard© or Desire2Learn©.
By participating in this exercise, participants will (1) gain experience in evaluating jobs
using the job classification method; (2) synthesize multiple concepts on the topic of job
evaluation including the basis for valuing work in organizations, the social and political process
of job evaluation, issues of reliability, and linking job evaluation results to the external market
Journal of Human Resources Education
33
Vol. 8, No. 2/3, Spring/Summer 2014
rates for jobs; and (3) reflect upon the strengths and weaknesses of the classification method of
job evaluation.
The exercise can be completed in one hour and fifteen minutes provided students have
classified the positions individually prior to class. The exercise was successfully conducted in a
class of 40 students working in groups of five students each.
FACILITATING THE EXERCISE
Prior to the exercise, students should be assigned readings on the topic of job evaluation.
Both human resource management textbooks and compensation textbooks frequently contain
sufficient detail on the job evaluation process and the various job evaluation methods typically
employed by organizations (see Appendix A for a suggested reading list). The instructor should
provide students with the assignment instructions which includes the hyperlink to the ASCE
Guidelines for Engineering Grades and the five position descriptions (see Appendix B).
Preceding the in-class group exercise, students should be instructed to classify each of the
five positions using the ASCE guidelines and to bring their classification decisions and notes
justifying their classifications to class. On the day of class, place students in assigned groups.
Each group will need to have internet access to find salary data for a benchmark job. Explain to
students that each group is working as a classification committee charged with classifying and
pricing the five new positions. Tell students they will have 25 minutes to reach a consensus on
the classification of each position.
After reaching a consensus, instruct students to find salary data for a benchmark job in
the job structure using the following websites: O*Net online or Glassdoor.com. If necessary,
review the concept of a benchmark job as one that would be common across different employers
and include a sizable number of employees or tell students to use “civil engineer” as the
benchmark job for the job structure. Allow the groups 10 minutes to locate salary data for the
benchmark position and then remind the groups to follow the assignment instructions and price
the remaining jobs in the job structure.
While students are interacting, visit each group to observe the consensus-reaching
process and take notes on any impasses or issues of conflict among team members. The
instructor should also be available to answer questions on locating salary information using the
assigned websites. After groups have located the salary information and priced the remaining
jobs, have a representative from each group write their group’s job structure for the five positions
(i.e., list the five jobs in order from most valuable to least valuable) and the pay rate for each
position on the classroom white/chalk board or flip chart paper. After all of the groups have
shared their job structures and pay rates, provide a copy of the job structure developed by the
SMEs from the engineering firm (Appendix C). Use the remainder of the class time
(approximately 25 minutes) to facilitate a discussion focused on the following: (1) the challenges
experienced in assessing job content; (2) the reliability of the job classification method; (3) the
social/political nature of job evaluation; and (4) the purpose of linking the internal job structure
to external market data. Conclude the discussion with a brief summary of the advantages and
disadvantages of the classification method of job evaluation.
Journal of Human Resources Education
34
Vol. 8, No. 2/3, Spring/Summer 2014
75-Minute Learning Module
•
•
•
•
•
•
•
Distribute the assignment which includes the job descriptions and a link to the ASCE
guidelines for engineering grades
Instruct students to complete their individual job evaluations prior to the scheduled
class exercise and discussion.
On the day of class exercise, divide students into groups of five and instruct groups to
reach a consensus on the classification of the five jobs (25 minutes).
Instruct students to determine a pay rate for a benchmark job using O*Net online and
Glassdoor.com. Have students price the remaining jobs in the job structure based off
of the benchmark rate (20 minutes).
Have students create and post the group’s job structure for the five positions along
with the pay rate (5 minutes)
Post the SMEs job structure
Facilitate a discussion on the topics of the job classification method of job evaluation
and market pricing of jobs (25 minutes).
Discussion Questions
After the students have posted their results, begin by sharing with the class how the
positions were classified by SMEs working for a civil engineering firm. Have students
determine how closely each group’s job evaluations aligned with the opinions of the SMEs.
Begin the discussion by asking: How did you approach the job classification process?
Numerous approaches to job classification may arise, including a focus on the job duties, a focus
on the job specifications, or a combination of the two. It is important to stress the weighing of
job duties over job specifications. Job specifications should specify the minimum knowledge,
skills, abilities, and other qualities necessary to successfully complete the job duties. In this
exercise, the job duties of the Roadway/Highway Engineer are that of a Grade II Engineer, while
the job specifications are that of a Grade III Engineer. The inconsistency between job duties and
job specifications for the Roadway/Highway Engineer provide an opportunity to stress the role
job content plays in the classification method of job evaluation. Instructors may want to
introduce students to the following mantra, “evaluate the job and not the job holder.”
To introduce students to the social/political nature of the job evaluation process ask the
following follow-up questions: Why might the job responsibilities and job specifications for the
position not be aligned? Supervisors are often responsible for writing the position descriptions
that are reviewed by the job classification committee. Job descriptions contain a list of job
responsibilities as well as the job specifications or the knowledge, skills, abilities and other
qualifications necessary to successfully complete the job. Sometimes job specifications are
inflated based on the previous incumbent’s qualifications, the supervisor’s desire to increase the
salary for the position to enhance recruiting efforts, confusion over preferred vs. minimum
qualifications, the desire to reward an incumbent by reclassifying the job to a higher grade, or
some combination of these factors. Research shows that powerful managers can influence the
decisions of classification committees (Welbourne & Trevor, 2000); therefore classification
committees must be able to justify their decisions and operate with the support of upper
management if the job evaluation system is to result in non-discriminatory, equitable pay
Journal of Human Resources Education
35
Vol. 8, No. 2/3, Spring/Summer 2014
differentials among jobs. The importance of having managerial and non-managerial personnel
familiar with the jobs being classified should also be stressed.
In addition to the social and political nature of the job evaluation process, the reliability
of the job classification method needs to be discussed. Differences in the job structures among
groups or between the SMEs’ classification decisions and the groups’ job structures provides an
opportunity to discuss the reliability of job evaluations. Ask the following question: Why might
two classification committees using the same standards, classify the same job differently? The
job classification method is relatively easy to administer and implement once job classifications
have been established and generic job descriptions have been developed; however, the job
descriptions may be too broad to be useful (Milkovich, et al., 2011). Some jobs may have to be
forced to fit into a grade, and, in other instances, jobs may seem to fit into more than one
grade/level. Another possible explanation for inconsistent results might be a lack of familiarity
with the classification or job family. Again, having individuals on the committee who are
familiar with the jobs being classified, and who represent different departments in the
organization, is critical. In addition, the classification decisions need to be transparent and
subject to review to ensure consistency in the classification of jobs.
Then, turn the discussion to the role market data plays in developing the final pay
structure by asking: What makes one job more valuable than another? Job content is one
obvious answer. The ASCE Guidelines outline the knowledge, skills, and responsibilities
associated with each engineering grade. Typically, compensation and benefits increase with
higher grades; however, there are many other variables that play a role in pricing a job. Ask a
follow-up question: What factors outside of the job content may influence the value of a job?
Answers may include the market price for jobs, the local demand and supply of labor, the cost of
living in the area in which the job is located, job conditions, how critical the job is to the
business, or how powerful the department is in which the job is located. Finally, the instructor
can ask: What problems might result from using market data alone to determine an
organization’s job structure?
According to a 2012 WorldatWork survey of approximately 1,000 members, market
pricing was the most frequently listed “method” of job evaluation. Under market pricing, the
value of a job is determined strictly by the “going rate” for labor. Using market pricing alone
can result in pay inequities and variability. Perceived pay inequities can lead to pay
dissatisfaction which, in turn, can result in decreased organizational commitment and increased
turnover intentions (Vandenberghe & Tremblay, 2008). In addition, the use of market data alone
to determine job values may perpetuate existing wage inequities for females and minorities, thus
leaving an organization vulnerable to claims of discrimination (Milkovich, et al., 2011).
Discussion Summary
There is no perfect job evaluation system and research shows that different job evaluation
methods generate different pay structures (Madigan & Hoover, 1986). Job classification is a
non-quantitative, whole-job method of conducting job evaluations. The classification method is
used in the U.S. federal government and in private and public organizations. Challenges include
the development of classifications and writing standardized position descriptions representing the
Journal of Human Resources Education
36
Vol. 8, No. 2/3, Spring/Summer 2014
various levels within the classification; however, existing standards for many occupational
groups exist which can be adopted. The classification method is relatively easy to understand
and administer, but it can be impractical for organizations with widely diverse job families. In
addition, system integrity can be compromised if job descriptions are written based on
classification standards versus the actual work to be performed. Human resource generalists and
compensation specialists are frequently involved in the job evaluation process. HR professionals
should become familiar with the various methods of job evaluation and should be able to assist in
the development and administration of a job evaluation plan which supports the organization’s
objectives and values.
_______________
Vicki Fairbanks Taylor, Ph.D., is an associate professor of management in the John L. Grove College of Business,
Shippensburg University. She earned her doctorate from Temple University and teaches a variety of courses in
human resource management. Her research interests include organizational culture, interviewing, employee
discipline, and management education. Contact: [email protected].
REFERENCES
Madigan, R., & Hoover, D. (1986). Effects of alternative job evaluation methods on decisions
involving pay equity. Academy of Management Journal, 29 (1), 84-100.
Milkovich, G., Newman, J., & Gerhart, J. (2011). Compensation (10th ed.). Boston: McGrawHill Irwin.
Vandenberghe, C., & Tremblay, M. (2008). The role of pay satisfaction and organizational
commitment in turnover intentions: A two-sample study. Journal of Business Psychology,
22 (3), 275–286.
Welbourne, T., & Trevor, C. (2000). The roles of departmental and position power in job
evaluation. Academy of Management Journal, 43 (4), 761-771.
WorldatWork. (2007). The WorldatWork handbook of compensation, benefits & total rewards: A
comprehensive guide for HR professionals. Hoboken, N.J.: John Wiley & Sons.
Journal of Human Resources Education
37
Vol. 8, No. 2/3, Spring/Summer 2014
Appendix A
Recommended Reading List on Job Evaluation
1. Dessler, Gary (2013). Fundamental of Human Resource Management, 3rd Ed.
Pearson/Prentice Hall, Upper Saddle River, New Jersey.
2. Heneman, R. L. (2003). Job and Work Evaluation: A Literature Review. Public Personnel
Management, 32 (1), 47.
3. Martocchio, J. J. (2015). Strategic Compensation, 8th Ed. Pearson/Prentice Hall, Upper
Saddle River, New Jersey.
4. Milkovich, George T., Newman, Jerry M., & Gerhart, Jerry (2011). Compensation, 10th Ed.,
McGraw-Hill Irwin.
5. Office of Personnel Management, General Schedule Classification and Pay (n.d.). Retrieved
from http://www.opm.gov/policy-data-oversight/pay-leave/pay-systems/general-schedule/
6. The Bureau of National Affairs, Compensation and Benefits Library (n.d.). Retrieved from
http://hr.bna.com/hrrc/#/cb
7. WorldatWork (2007). The WorldatWork Handbook of Compensation, Benefits, & Total
Rewards: A Comprehensive Guide for HR Professionals. John Wiley & Sons, Inc., Hoboken,
New Jersey.
Journal of Human Resources Education
38
Vol. 8, No. 2/3, Spring/Summer 2014
Appendix B
Job Evaluation at Alpha Engineering
(Student Handout)
Objective
This exercise has been developed to give you experience in the job evaluation process, using the
classification method.
Overview of the Assignment
Working as members of a job evaluation committee of Alpha Engineering, your task is to
evaluate five civil engineering jobs using the ASCE Guidelines for Engineering Grades. The
five jobs are bridge engineer, project engineer, construction engineer, civil engineer, and
roadway/highway engineer. The position descriptions can be found on the pages following the
assignment instructions. Use the following hyperlink to locate the ASCE Guideline for
Engineering Grades: http://www.asce.org/Leadership-Resources/Leadership-Tools-andResources/Guidelines-for-Engineering-Grades/
Instructions
1. Working individually, each member of the compensation committee determines the
classification level of each position using the ASCE Guideline for Engineering Grades.
2. Share your decisions with your group. As a group, arrive at a consensus for the classification
of each position. Make sure to record the reasons for your classification.
3. Establish pay rates for the all of the jobs in the job structure by (a) identifying a benchmark
job for the job structure, (b) determining a competitive pay rate for the benchmark job using
O*Net Online <http://www.onetonline.org/> and Glassdoor.com
<http://www.glassdoor.com/index.htm>, and (c) pricing the remaining jobs in the job
structure based on the rate for the benchmark job.
4. Upon completion of the job evaluation exercise, present your job structure and pay structure
to the class.
Journal of Human Resources Education
39
Vol. 8, No. 2/3, Spring/Summer 2014
Bridge Engineer Job Description
Job Summary: The Bridge Engineer will manage tasks and projects for highway transportation
structures, including bridges and ancillary structures
Job Duties:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Oversee the design structural components of box culverts, retaining walls and related
structures
Develop Contract Bid Packages of plans, specifications and engineer's construction cost
estimate
Develop details of bridge components for contracts drawings
Understand and develop construction sequencing
Perform Load Ratings
Oversee and perform bridge inspections as a Team Leader
Review bridge inspection reports
Participate in project meetings and write minutes of such meetings
Some client contact that will be handled in a professional manner
Track Project Budget and costs
Strong understanding of Project Scope and identifying work that is outside of project
scope
Develop man-hour estimates
Understand the requirements of other disciplines and how they impact the project
Day-to-day management of projects for the bridge department, including structural
design and analysis and development of contract documents.
Supervise and mentor less experienced engineers. Supervise CADD Technicians
developing plan sets
Coordinate and work with engineers in other disciplines
Be able to communicate via spoken and written word with other technical and nontechnical personnel.
Job Requirements:
•
•
•
•
Bachelor's Degree in Civil Engineering. Master's in Civil Engineering preferred.
PE
12+ years of Bridge Engineering experience
NBIS two-week Bridge Inspector's Course and Fracture Critical Member Inspection
Course a plus.
Journal of Human Resources Education
40
Vol. 8, No. 2/3, Spring/Summer 2014
Project Engineer Job Description
Job Summary: As a fully competent Registered Professional Engineer, performs work involving
the application of all conventional aspects of civil engineering to the functional area of the
assignment.
Job Duties:
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Exercises judgment in the independent evaluation, selection and substantial adaptation
and modification of standard techniques, procedures, and criteria.
Responsible for applying intensive and diversified knowledge of civil engineering
principles and practices in broad areas.
Includes technical direction over a group of civil engineers and/or functions as a technical
specialist, formulating and developing advanced civil engineering concepts.
Coordinates technical and administrative activities with those of other disciplines and
other departments in the company participating in a project.
Markets the firm’s capabilities within the civil engineering specialty to establish new
clients and enhance relationships with existing clients. Prepares proposals for potential
projects.
Participates in the selection of design teams and sub-consultants and in the negotiations
of fees and subcontractors.
Conducts constructability reviews or assists in the design/planning/review of other civil
engineering projects not assigned to the incumbent.
Supervises the design and ongoing progress of a project, including the coordination of the
project with City, State, and County officials, and other outside agencies.
Resolves a variety of complex problems, (i.e. conflicting design requirements,
unsuitability of conventional materials, difficult coordination requirements).
Serves as a liaison between clients and agencies, subcontractors, and design teams.
Reviews plans and prepares or reviews technical specifications, contract documents, and
estimates.
Participates in contract bidding and administration; observes project action on site.
Supervises the work of less experienced engineers and/or technical support personnel
assigned to the project (not an on-going substantial job component).
May be required to complete safety training courses relative to engineering project
environments (i.e. fall protection, confined space entry, CPR/first aid, electrical safety,
personal protective equipment, OSHA safety, or hazard communication).
Travel may be required to attend meetings, project sites, or other business-related
functions as part of your job duties. When a company vehicle is unavailable, your
personal vehicle shall be utilized.
Job Requirements:
•
•
•
•
Bachelor of Science Degree in Civil Engineering is required;
Master of Science Degree in Civil Engineering is a plus.
Registration as a Professional Engineer
Minimum of five years of progressive work experience within the civil engineering field.
Journal of Human Resources Education
41
Vol. 8, No. 2/3, Spring/Summer 2014
Construction Engineer Job Description
Job Summary: Perform construction engineering and management duties for land development
and municipal projects, focused on water and wastewater treatment facilities.
Job Duties:
•
•
•
•
•
•
•
•
•
Provide overall administrative and technical direction for land development projects.
Oversee total construction management to ensure project is constructed in accordance
with design, budget and schedule. Includes interfacing with client representatives,
engineers, vendors, subcontractors, etc.
Plan, coordinate and/or supervise field activities of field personnel on assigned project(s).
Maintain official project log and documentation files.
Provide direction to planning, scheduling, and engineering functions as required.
Responsible for obtaining signatures for contracts, processing pay estimates and change
orders, coordinating inspections and pre-construction meetings.
Attend various bid openings and district meetings.
Prepare bid tabulations and maintain files for bond issues.
Successful candidates will apply good organizational skills and take charge of overall
coordination of preparing and reviewing contracts.
Job Requirements:
•
•
•
•
•
•
•
•
Bachelors of Science with an emphasis in Civil Engineering
Registered Texas Professional Engineer
At least 5 years of progressive experience in a Construction Management role
At least 5 years of experience with water, wastewater treatment plant expansions,
underground utilities, paving projects, ground storage tanks, elevated tanks, water wells,
and sewer rehabilitation.
Thorough knowledge of all aspects of construction (technology, equipment, methods,
procedures and standards)
Familiar with subdivision grading, streets, sewage, storm drains, and public works
excellent oral and written communication skills
Microsoft Office and scheduling software experience
Journal of Human Resources Education
42
Vol. 8, No. 2/3, Spring/Summer 2014
Civil Engineer Job Description
Job Summary: Position involves designing roadways, site/grading plans, sanitary sewer, storm
sewers and waterlines under the supervision of project manager.
Job Duties:
•
•
•
•
•
•
•
•
Preparing construction plans and specifications.
Coordinating with utility companies, permitting agencies and supervisory staff.
Preparing and reviewing storm drainage reports.
Reviewing construction plans for technical and grammatical accuracy
Preparing accurate summaries of quantities
Estimating construction costs
Performing field investigations
Completing related duties as assigned
Job Requirements:
•
•
•
•
•
Civil engineering degree from an accredited university
Ability to work well with others in a team environment.
intrinsically motivated to meet deadlines and budgets
Possess the ability to clearly communicate his/her design intentions to design and drafting
technicians.
Requires proficiency with Microsoft office applications and AutoCAD Civil 3D.
Hydrologic and hydraulic modeling, GIS, construction administration and traffic
engineering capabilities are also desirable.
Journal of Human Resources Education
43
Vol. 8, No. 2/3, Spring/Summer 2014
Roadway/Highway Engineer Job Description
Job Summary: primary focus is to serve in a technical role, under the direction of a Project
Manager, on the engineering development of urban and rural highway/roadway projects.
Job Duties:
•
•
•
•
•
•
Oversee the work of CAD Designers and possibly other EITs,
Prepare detailed engineering designs for roadway and highway projects including urban
and rural highway interchanges, intersection design, traffic management, transportation
planning, and site planning,
Preparation of concept alignments, geometrical layout and CAD base alignment plans,
Complete drainage and storm water management calculations.
Analyze site feasibility to final design and through the construction phase.
Coordination of survey, grading, drainage and utilities and layout of various site items
Requirements:
•
•
•
•
•
Bachelor of Science in Civil Engineer and PE required
10 years highway design experience
Demonstrated hands-on experience using Microstation and either Inroads or GeoPak
MS Office knowledge required.
Excellent communication and organizational skills required.
Journal of Human Resources Education
44
Vol. 8, No. 2/3, Spring/Summer 2014
Appendix C
(Instructor Resource)
Subject Matter Experts’ Opinions
Job Title
Civil Engineer
Roadway/Highway Engineer
Construction Engineer
Bridge Engineer
Project Engineer
Classification based on Job
Duties
Grade I
Grade II
Grade IV
Grade IV
Grade V
Classification based on Job
Specifications
Grade I
Grade III
Grade IV
Grade IV or Grade V
Grade III
Journal of Human Resources Education
45
Vol. 8, No. 2/3, Spring/Summer 2014
Download