curve 613-07 1/30/08 3:44 PM Page 1 80 90 100 70 60 50 40 10000 9000 8000 10000 9000 8000 7000 7000 6000 6000 5000 5000 4000 4000 3000 3000 2000 2000 1500 1500 1000 900 800 1000 900 800 700 700 600 600 500 500 400 400 300 300 200 200 150 150 INSTANTANEOUS PICKUP x In 100 90 80 100 90 80 70 70 60 60 50 50 40 40 30 30 10 x 20 20 15 15 10 9 8 10 9 8 7 7 6 6 5 5 4 4 3 3 2 2 1.5 1.5 1 .9 .8 1 .9 .8 .7 .7 .6 .6 .5 .5 .4 .4 .3 .3 .2 .2 .15 2x 3x 4x 6x 8x MICROLOGIC® 5.0/6.0 A/P/H TRIP UNIT CHARACTERISTIC TRIP CURVE NO. 613-7 Instantaneous Pickup 2x–15x and OFF The time-current curve information is to be used for application and coordination purposes only. Curves apply from -30° to +60°C ambient temperature. Notes: 1. The end of the curve is determined by the interrupting rating of the circuit breaker. 2. Total clearing times shown include the response times of the trip unit, the circuit breaker opening, and the extinction of the current. 3. The instantaneous region of the trip curve shows maximum total clearing times. Actual clearing times in this region can vary depending on the circuit breaker mechanism design and other factors. The actual clearing time can be considerably faster than indicated. Contact your local Sales Office for additional information. 4. For a withstand circuit breaker, instantaneous can be turned OFF. See 613-7 for instantaneous trip curve. See 613-10 for instantaneous override values. 5. See 613-4 and 613-5 for long-time pickup, long-time delay, short-time pickup, and shorttime delay trip curves. .15 12 x 15 x .1 .09 .08 .1 .09 .08 .07 .07 .06 .06 .05 .05 .04 .04 .03 .03 .02 .02 1 CYCLE .015 .01 .009 .008 1 .015 .01 .009 .008 2 CYCLE 80 90 100 70 60 50 40 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .005 .8 .9 1 .006 .005 .7 .007 .006 .6 .007 .5 TIME IN SECONDS 30 20 15 8 9 10 7 6 5 4 3 2 1.5 .8 .9 1 .7 .6 .5 MULTIPLES OF SENSOR RATING (In) MULTIPLES OF SENSOR RATING (In) © 2008 Schneider Electric all rights reserved Curve No. 0613TC0807 January 2008 Drawing No. 48095-0613-07 (Replaces 0613TC0007)